KGRKJGETMRETU895U-589TY5MIGM5JGB5SDFESFREWTGR54TY
Server : Apache/2.4.62
System : FreeBSD fbsdweb2.web.rcn.net 14.1-RELEASE FreeBSD 14.1-RELEASE releng/14.1-n267679-10e31f0946d8 GENERIC amd64
User : www ( 80)
PHP Version : 8.3.8
Disable Function : NONE
Directory :  /domains/deltaele/data/

Upload File :
current_dir [ Writeable ] document_root [ Writeable ]

 

Current File : /domains/deltaele/data/oldmc1xn-3.htm
<html>
<head>
<title>MF&#173;HF Receiver Multicoupler</title>
</head>
<body text="#000000" link="#0000ff" vlink="#551a8b" alink="#ff0000" bgcolor="#70A0E0">
<center><img src=../delta1.jpg alt="Delta Electronics, Inc."> 
<h2>MF&#173;HF Receiver Multicoupler<br>with 3 dB Gain</h2></center>
<p><center><table><img src="mc1x16-3.jpg" alt="MF-HF Receiver Multicoupler Picture"></table></center>
<hr>
<h3>Application</h3>

<p>The MC&#173;1 X 16-3 MF-HF Receiver Multicoupler is designed for use with receiving antennas and communications receivers in the 100 kHz to 32 MHz frequency range. The multicoupler provides a nominal 3 dB amplification of the received signal to compensate for antenna cable losses. The MC-1 X 16-3 provides 16 receiver outputs from one antenna input.

<p>The high isolation multicoupler design minimizes interaction between receivers and reradiation into the antenna. The multicoupler has 50 Ohm input and output impedances.

<h3>Features</h3>

<p>The multicoupler utilizes low noise, wideband, high&#173;linearity amplifiers to drive the RF distribution circuits. The unique circuit design permits operation in the presence of high intensity RF signals while minimizing undesired intermodulation distortion and noise. The multicoupler provides a minimum of 50 dB isolation between outputs and a minimum of 60 dB output-to-input isolation.

<p>The multicoupler is a 1-3/4" high (1 RU) rack mounting unit. 

<p>The standard internal filters supplied with the unit reject undesired out-of-band signals below 2 MHz and above 32 MHz. The 2 MHz high pass filter may be bypassed to enable the full 100 kHz to 32 MHz frequency range of the unit. An optional 500 kHz high pass filter is available to enable MF-HF operation and to reject LF signals. An optional 2 MHz low pass filter is available for dedicated MF requirements. Custom filters are available for restricted bandwidth applications or for single frequency notch requirements.

<p>The multicoupler is also available equipped with either 8 (MC-1&nbsp;X&nbsp;8-3) or 12 (MC-1&nbsp;X&nbsp;12-3) outputs. On special order, the multicoupler is available with two antenna inputs and 8 outputs for each input (MC-2&nbsp;X&nbsp;8-3) or with four antenna inputs and 2 outputs for each input (MC-4&nbsp;X&nbsp;2-3). Consult the factory for optional filter or input/output configuration requirements.

<h3>Built-In Test</h3>

<p>The multicoupler continuously monitors the bias conditions of its amplifier stages. Any bias errors are indicated by the Amplifier Fault LED on the front panel. The amplifier assembly and the filter assemblies use Type SMB connectors for all RF signal interfaces allowing maintenance by replacement of the amplifier or filter assembly.
<p><center><table border=0 cellpadding=20><tr><td><img src="mc-1x162.jpg" alt="MC-1 x 16 (back)" height=61 width=600></td></tr></table></center>
<hr>
<table  cellpadding=12 border bgcolor=White>
<caption><strong>SPECIFICATIONS</strong></caption>
<tr><td><table cellpadding=4>
<tr valign="top"><td width="30%"><strong>Input/Output Configuration:</strong></td><td width="76%">1 input, 16 outputs</td></tr>
<tr valign="top"><td><strong>Frequency Range:</strong></td><td>100 kHz to 32 MHz</td></tr>
<tr valign="top"><td><strong>Characteristic Impedance:</strong></td><td>50 Ohms unbalanced</td></tr>
<tr valign="top"><td><strong>Gain:</strong></td><td>3 dB &#177;1 dB</td></tr>
<tr valign="top"><td><strong>Frequency Response:</strong></td><td>&#177;1 dB</td></tr>
<tr valign="top"><td><strong>Input/Output VSWR:</strong></td><td>1.5:1 Maximum</td></tr>
<tr valign="top"><td><strong>Noise Figure:</strong></td><td>7.5 dB Max @ +25&#176; C<br>7.75 dB Max @ +40&#176; C</td></tr>
<tr valign="top"><td><strong>Intermodulation Distortion:</strong></td><td>Suppression of 2nd and 3rd order intermodulation products 60 dB minimum below two 0 dBm output signals (OPIP<sup>2</sup> = +60 dBm, OPIP<sup>3</sup> = +30 dBm).</td></tr>
<tr valign="top"><td><strong>Output/Output Isolation:</strong></td><td>50 dB Minimum</td></tr>
<tr valign="top"><td><strong>Output/Input Isolation:</strong></td><td>60 dB Minimum</td></tr>
<tr valign="top"><td><strong>Output 1 dB Compression:</strong></td><td>+10 dBm input signal</td></tr>
<tr valign="top"><td><strong>Desensitization:</strong></td><td>Undesired +10 dBm signal will reduce a &#173;30 dBm signal by not more than 1 dB.</td></tr>
<tr valign="top"><td><strong>Standard Filtering:</strong></td><td>2 MHz high pass filter provides minimum of 57 dB rejection below 1.5 MHz. 32 MHz low pass filter provides minimum of 40 dB rejection above 45 MHz.</td></tr>
<tr valign="top"><td><strong>Optional Filtering:</strong></td><td>500 kHz high pass filter provides minimum of 30 dB rejection below 250 kHz. 2 MHz low pass filter provides minimum of 50 dB rejection above 3 MHz. Notch filter provides nominal 30 dB rejection at customer specified frequency.</td></tr>
<tr valign="top"><td><strong>Phase Tracking Between Outputs:</strong></td><td>&#177;2&#176; (&#177;1&#176; Available on special order)</td></tr>
<tr valign="top"><td><strong>Input/Output Connectors:</strong></td><td>Type BNC</td></tr>
<tr valign="top"><td><strong>Power Requirements:</strong></td><td>120/240 VAC &#177;10%, 47/63 Hz, 75 Watts Standard<br>100/200 VAC &#177;10%, 47/63 Hz, 75 Watts Optional</td></tr>
<tr valign="top"><td><strong>Environmental:</strong></td><td>Temperature, Operation: 0 to +40&#176; C<br>Temperature, Storage: &#173;35 to +71&#176; C<br>Humidity: 0 to 95% noncondensing</td></tr>
<tr valign="top"><td><strong>Dimensions:</strong></td><td>1-3/4" (44 mm) high x 19" (483 mm) wide x 16" (406 mm) deep.</td></tr>
<tr valign="top"><td><strong>Weight:</strong></td><td>12 pounds (5.4 kg)</td></tr>
<tr valign="top"><td><strong>Part Number:</strong></td><td>D10-17-1 (120 VAC)<br>D10-17-2 (240 VAC)<br>D10-17-3 (100 VAC)<br>D10-17-4 (200 VAC)</td></tr>
</table>
</td></tr></table>
<p><hr>
<br>For additional information on any of our products, please contact <a href="mailto:[email protected]">Sales</a> to discuss your particular requirements:<br>
<center><table cellpadding=20>
<tr valign=top>
<td><strong>Delta Electronics, Inc.<br>
    5730 General Washington Drive<br>
    P. O. Box 11268<br>
    Alexandria, VA 22312</strong></td>
<td><strong>Phone: (703) 354-3350<br>
    U.S. Toll Free: 1-800-8-DELTA-8 (1-800-833-5828)<br>
    Fax: (703) 354-0216<br>
    <address>www.deltaelectronics.com</address>
    Email: <a href="mailto:[email protected]">[email protected]</a></strong></td>
</tr>
</table></center><hr>
<center><table border=2 cellpadding=10 bgcolor=White>
<tr>
 <td><strong><a href="../index.html">HOME</a></strong></td>
 <td><strong><a href="../amprod.htm">AM/FM/TV Products</a></strong></td>
 <td><strong><a href="../hfprod.htm">HF/VHF/UHF Products</a></strong></td>
</tr>
</table>
<font size=1>The Delta Electronics logo is a registered trademark of Delta Electronics, Inc.</center></font>
</body>
</html>

Anon7 - 2021