|
Server : Apache/2.4.62 System : FreeBSD fbsdweb2.web.rcn.net 14.1-RELEASE FreeBSD 14.1-RELEASE releng/14.1-n267679-10e31f0946d8 GENERIC amd64 User : www ( 80) PHP Version : 8.3.8 Disable Function : NONE Directory : /domains/deltaele/data/ |
Upload File : |
<html><head><title>Delta Electronics, Inc. Receiver Multicouplers</title></head>
<body bgcolor="#70A0E0">
<center><img src=../delta1.jpg alt="Delta Electronics, Inc.">
<h2>MF - HF Receiver Multicouplers</h2>
<img src="mc-1x16b.jpg" alt="MC-1 x 16" height=59 width=600></center>
<hr>
<h3>Application</h3>
The MC-1 X 8, MC-1 X 12, MC-1 X 16, and MC-1 X 32 MF-HF Receiver Multicouplers are designed for use with receiving antennas and communications receivers in the 100 kHz to 32 MHz frequency range. The high isolation multicouplers minimize interaction between receivers and reradiation into the antenna.<p>
The MC-1 X 8 provides 8 receiver outputs from one antenna input. From a single antenna input, the MC-1 X 12 provides 12 receiver outputs, the MC-1 X 16 provides 16 receiver outputs, and the MC-1 X 32 provides 32 receiver outputs. All models have 50 Ohm input and output impedances.<p>
<h3>Features</h3>
Each multicoupler uses low noise, wideband, high-linearity amplifiers to drive the RF distribution circuits. The unique circuit design permits operation in the presence of high intensity RF signals while minimizing undesired intermodulation distortion and noise. The multicoupler provides a minimum of 50 dB isolation between outputs and a minimum of 60 dB output-to-input isolation.<p>
The MC-1 X 8, MC-1 X 12 and the MC-1 X 16 multicouplers are 1-3/4" high rack mounting units. The MC-1 X 32 multicoupler contains two 16 output amplifier assemblies which are driven by a unity gain dual output amplifier. The MC-1 X 32 is a 3-1/2" high rack mounting unit.<p>
The standard internal filters supplied with the unit reject undesired out-of-band signals below 2 MHz and above 32 MHz. The 2 MHz high pass filter may be bypassed to enable the full 100 kHz to 32 MHz frequency range of the unit. An optional 500 kHz high pass filter is available to enable MF-HF operation and to reject LF signals. An optional 2 MHz low pass filter is available for dedicated MF requirements. Custom filters are available for restricted bandwidth applications or for single frequency notch requirements.<p>
Each multicoupler is also available with an optional gain block amplifier to provide a fixed insertion gain. The <a href="mc1x16-3.htm">MC-1 X 16-3 MF-HF Receiver Multicoupler</a> provides a nominal 3 dB amplification of the received signal to compensate for antenna losses. On special order, the multicoupler is available with two antenna inputs and either 8 outputs for each input (MC-2 X 8), or 16 outputs for each input (MC-2 X 16). The multicoupler is also available with four antenna inputs and two outputs for each input (MC-4 X 2). Consult the factory for optional filter, amplifier gain or configuration requirements.<p>
<h3>Built-In Test</h3>
Each multicoupler continuously monitors the bias conditions of its amplifier stages. Any bias errors are indicated by the Amplifier Fault LED on the front panel. The amplifier assembly and the filter assemblies use Type SMB connectors for all RF signal interfaces allowing maintenance by replacement of the amplifier or filter assembly.<p>
<center><table border=0 cellpadding=20><tr><td><img src="mc-1x162.jpg" alt="MC-1 x 16 (back)" height=61 width=600></td></tr></table></center>
<br><hr>
<center><table cellpadding=8 cellspacing=0 border bgcolor=White>
<caption><strong>SPECIFICATIONS</strong></caption>
<tr><td><table width=100% border=0 cellpadding=0 cellspacing=0>
<tr><td><table width=100% border=0 cellpadding=2 cellspacing=0>
<tr><td width=30%><strong>Input/Output Configurations:</strong></td><td width=15%>MC-1 X 8:</td><td> 1 input, 8 outputs</td></tr>
<tr><td> </td><td>MC-1 X 12:</td><td> 1 input, 12 outputs</td></tr>
<tr><td> </td><td>MC-1 X 16:</td><td> 1 input, 16 outputs</td></tr>
<tr><td> </td><td>MC-1 X 32:</td><td> 1 input, 32 outputs</td></tr>
</table></td></tr>
<tr><td><table width=100% border=0 cellpadding=2 cellspacing=0>
<tr><td width=30%><strong>Frequency Range:</strong></td><td colspan=2>100 kHz to 32 MHz</td></tr>
<tr><td width=30%><strong>Characteristic Impedance:</strong></td><td colspan=2>50 Ohms unbalanced</td></tr>
<tr><td width=30%><strong>Gain:</strong></td><td colspan=2>1 dB ±1 dB</td></tr>
<tr><td width=30%><strong>Frequency Response:</strong></td><td colspan=2>±1 dB</td></tr>
<tr><td width=30%><strong>Input/Output VSWR:</strong></td><td colspan=2>1.5:1 Maximum</td></tr>
<tr valign="top"><td width=30%><strong>Noise Figure:</strong></td><td width=25%>MC-1 X 8, MC-1 X 12 <br>and MC-1 X 16:</td><td>8 dB Max @ +25° C<br>8.25 dB Max @ +40° C</td></tr>
<tr valign="top"><td width=30%> </td><td>MC-1 X 32:</td><td>10.75 dB Max @ +25° C<br>11 dB Max @ +40° C</td></tr>
<tr valign="top"><td width=30%><strong>Intermodulation Distortion:</strong></td><td colspan=2>MC-1 X 8, MC-1 X 12 and MC-1 X 16:
<blockquote>Suppression of 2nd and 3rd order intermodulation products 60 dB minimum below two 0 dBm signals (OPIP<sup>2</sup> = +60 dBm, OPIP<sup>3</sup> = +30 dBm).</blockquote>
MC-1 X 32:<blockquote>Suppression of 2nd and 3rd order intermodulation products 54 dB minimum below two 0 dBm signals (OPIP<sup>2</sup> = +54 dBm, OPIP<sup>3</sup> = +27 dBm).</blockquote></td></tr>
<tr><td width=30%><strong>Output/Output Isolation:</strong></td><td colspan=2>50 dB Minimum</td><td colspan=2>
<tr><td width=30%><strong>Output/Input Isolation:</strong></td><td colspan=2>60 dB Minimum</td></tr>
<tr><td width=30%><strong>Output 1 dB Compression:</strong></td><td colspan=2>+13 dBm input signal</td></tr>
<tr valign="top"><td width=30%><strong>Desensitization:</strong></td><td colspan=2><td>Undesired 1 V<sub>rms</sub> (+13 dBm) signal will reduce a 10 mV<sub>rms</sub> (-27 dBm) signal by not more than 1 dB.</td></tr>
<tr valign="top"><td width=30%><strong>Standard Filtering:</strong></td><td colspan=2>2 MHz high pass filter provides minimum of 60 dB rejection below 1.5 MHz. 32 MHz low pass filter provides minimum of 40 dB rejection above 45 MHz.</td></tr>
<tr valign="top"><td width=30%><strong>Optional Filtering:</strong></td><td colspan=2>500 kHz high pass filter provides minimum of 30 dB rejection below 250 kHz. 2 MHz low pass filter provides minimum of 50 dB rejection above 3 MHz. Notch filter provides nominal 30 dB rejection at customer specified frequency.</td></tr>
<tr valign="top"><td width=30%><strong>Phase Tracking Between Outputs:</strong></td><td colspan=2>±2° (±1° Available on special order)</td></tr>
<tr valign="top"><td width=30%><strong>Input/Output Connectors:</strong></td><td colspan=2>Type BNC</td></tr>
<tr valign=top><td width=30%><strong>Power Requirements:</strong></td><td colspan=2>120/240 VAC ±10%, 47/63 Hz Standard<br>
100/200 VAC ±10%, 47/63 Hz Optional<br>
MC-1 X 8: 50 watts<br>
MC-1 X 12: 65 watts<br>
MC-1 X 16: 75 watts<br>
MC-1 X 32: 150 watts</td></tr>
<tr valign="top"><td width=30%><strong>Environmental:</strong></td><td colspan=2>Temperature, Operation: 0 to +40° C
<br>Temperature, Storage: -35 to +71° C
<br>Humidity: 0 to 95% noncondensing</td></tr>
</table></td></tr>
<tr><td><table width=100% border=0 cellpadding=2 cellspacing=0>
<tr valign=top><td width=30%><strong>Dimensions:</strong></td><td width=25%>MC-1 X 8, MC-1 X 12<br> and MC-1 X 16:</td><td>1-3/4" high x 19" wide x 16"deep<br>(44 mm high x 483 mm wide x 406 mm deep)</td></tr>
<tr valign=top><td> </td><td>MC-1 X 32:</td><td>3-1/2" high x 19" wide x 16" deep<br>(89 mm high x 483 mm wide x 406 mm deep)</td></tr>
</table></td></tr>
<tr><td><table width=100% border=0 cellpadding=2 cellspacing=0>
<tr valign=top><td width=30%><strong>Weight:</strong></td><td width=25%>MC-1 X 8, MC-1 X 12 <br> and MC-1 X 16:</td><td>12 pounds (5.4 kg)</td></tr>
<tr><td></td><td>MC-1 X 32:</td><td>24 pounds (10.8 kg)</td></tr>
</table></td></tr>
</table></td></tr>
</table></center>
<hr>
For additional information on any of our products, please contact <a href="mailto:[email protected]">Sales</a> to discuss your particular requirements:<br>
<center><table cellpadding=20>
<tr valign=top>
<td><strong>Delta Electronics, Inc.<br>
5730 General Washington Drive<br>
P. O. Box 11268<br>
Alexandria, VA 22312</strong></td>
<td><strong>Phone: (703) 354-3350<br>
U.S. Toll Free: 1-800-8-DELTA-8 (1-800-833-5828)<br>
Fax: (703) 354-0216<br>
<address>www.deltaelectronics.com</address>
Email: <a href="mailto:[email protected]">[email protected]</a></strong></td>
</tr>
</table></center><hr>
<center><table border=2 cellpadding=10 bgcolor=White>
<tr>
<td><strong><a href="../index.html">HOME</a></strong></td>
<td><strong><a href="../amprod.htm">AM/FM/TV Products</a></strong></td>
<td><strong><a href="../hfprod.htm">HF/VHF/UHF Products</a></strong></td>
</tr>
</table>
<font size=1>The Delta Electronics logo is a registered trademark of Delta Electronics, Inc.</center></font>
</body></html>